Orbis Premier - Pull Handles - Elliptical Section

Designed to be compatible with 54 900.13 lever handle design

• Supplied as dedicated bolt through or back to back fixing options c/w fixing pack
• Bolt through handles are supplied with fixings FPP3 and back to back handles are supplied with fixing pack FPP5
• Can be used independently or in association with a unique system of backplates and inserts
  
• Standard M8 fixing packs suit doors up to 55mm thick - other thicknesses to special order
• Alternative fixing types are also available
• 316 Stainless Steel
  

Please Note: these pull handles are also interchangeable with the pull handles in the Orbis Commercial range.

Pull handle - Bolt through fixing
		Finishes
Item no.	Centres (mm)	SS7	PS7	Unit
53 922.18	180	•	•	single
53 922.24	240	•	•	single
53 922.30	300	•	•	single
53 922.45	450	•	•	single

Pull handle - Back to Back fixing
		Finishes
Item no.	Centres (mm)	SS7	PS7	Unit
53 922.18BB	180	•	•	pairs
53 922.24BB	240	•	•	pairs
53 922.30BB	300	•	•	pairs
53 922.45BB	450	•	•	pairs

Specification advice

For compliance with DocM, we recommend the use of pull handles with 450mm centres or longer. Pull handles are supplied with the appropriate fixing packs for bolt through or back to back fixing. If specifying a single bolt through pull handle, appropriate push plates are available for fixing to the push side of the door

As with Orbis Premier lever handles, the pull handle range is also available in the unique combinations of Polished and Satin Stainless Steel. The dual finish is available on pull handle sizes and fixing options as shown in the tables below.

To specify the Dual Finish, simply add one of the following suffixes to the product reference:

DPS - For Dual finish Polished centre and Satin ends
DSP - For Dual finish Satin centre and Polished ends

The examples shown opposite are:
53 922.30.1DSP
53 922.30.1DPS

'Thread side' pull handle
		Finishes
Item no.	Centres (mm)	DSP	DPS	Unit
53 922.18.1	180	•	•	single
53 922.24.1	240	•	•	single
53 922.30.1	300	•	•	single
53 922.45.1	450	•	•	single

'Pin side' pull handle
		Finishes
Item no.	Centres (mm)	DSP	DPS	Unit
53 922.18.2	180	•	•	single
53 922.24.2	240	•	•	single
53 922.30.2	300	•	•	single
53 922.45.2	450	•	•	single

Important Ordering Information

• For standard bolt through application order 'Thread side' pull handle only
• For back to back applications order 1 No. 'Thread side' and 1 No. 'Pin side' pull handle
• Thread side pull handles are supplied c/w FPP3.3 Fixing Pack
• Pin side pull handles are supplied c/w FPP5.2 Fixing Pack