The Modular Approach
1. Select Device
Firstly select which device you wish to use, either a Panic Pushbar or a Panic Touchbar
Pushbar finish: Silver/Metallic
Touchbar finish: Silver/Metallic
 |
59 861 One point Panic Pushbar Device
|
 |
| 59 871.1 & 59 871.2 One point Panic Touchbar Device |
Specification advice Remember to select the correct length of Touchbar unit to suit the door width.
2. Choose the Locking Point Configuration
Choose the most suitable modular locking point configuration. For increased security there is the option of an additional modular locking point.
All kits supplied with all rods and necessary fixings
Finish: Silver/Matt black
 |
 |
59 881 Upper & Lower Pullmans Kit
|
59 882 Two Side Pullmans Kit
|
 |
 |
| 59 883LH & 59 883RH Upper & Side Pullmans Kit |
59 884LH & 59 884RH Additional Side Pullmans Kit |
Controlled Access
Outside access device for use with both Orbis Commercial Pushbar and Touchbar devices. Using an Orbis outside locking device will give access from the outside for key holders when the door is locked. When unlocked the door can also be operated from the outside by using lever/knob. Choice of interchangeable knob, or lever (available separately) allowing the most appropriate method of operation to be selected for the building users.
Outside Access Devices - 36 413.LE & 36 413.KE
| |
|
Supplied with euro-profile cylinder as standard. Cylinders can be keyed alike or master-keyed
- Suitable for door thickness 40mm - 70mm
- Fixings supplied are suitable for timber and metal doorsets
- Tested to 200,000 cycles
- Powder coated for additional durability - choice of silver, matt black, gold, brown bronze or Normbau finishes
- Choice of plated finishes - satin stainless steel and polished brass
For all other forms of access control (digital, electronic etc) please contact the Laidlaw Technical Helpline.
|
Top Rod Extension Kit - 59 889
 |
|
Rod extension kits are suitable for use with both Orbis Commercial panic devices on doors in areas that require the pushbar or touchbar to be in a lower position ie schools. These can also be used on doors up to 3350mm high, however doors over 2500mm high are outside the scope of BS EN 1125.
Finish: silver/matt black.
|