Orbis Classic - Pull Handle Fixings
Standard Orbis Commercial 53 800 Series bolt through handles are supplied as standard with fixings FPP3.5 and back to back handles are supplied with fixing pack FPP5.2.
Alternative sizes and fixing types are also available as shown in the table below.
Note: Clearance hole for glass door fixings FPP6 and FPP7 - 14mm Ø
| |
Description |
Item no. |
Door Thickness |
| FPP1 |
Secret face fixing for timber doors with threaded plugs and M8 fixing bolts.
For use with Pin side pull handles only |
FPP1 |
n/a |
| FPP2 |
Concealed rose face fixing (roses not included with fixing pack) |
FPP2.1 |
n/a |
| FPP3 |
Bolt through fixing for timber doors with CSK M8 bolts.
For use with Thread side pull handles only |
FPP3.2
FPP3.3
FPP3.5 |
40 - 55mm
35mm
55 - 65mm |
| FPP5 |
Back to back fixing for timber doors with M8 bolt.
For use with one Thread side and one Pin side pull handle. |
FPP5.2
FPP5.3 |
40 - 55mm
35mm |
| FPP6 |
Back to back fixing for glass doors with M8 bolt, 13mmØ nylon bush and washers.
For use with one Thread side and one Pin side pull handle. |
FPP6.1
FPP6.2
FPP6.3 |
19mm pulls
22mm pulls
10 - 14mm Glass - to suit s3 833 pull handles
|
| FPP7 |
Bolt through fixing for glass doors with M8 'Pig nosed' bolt.
For use with Thread side pull handles only |
FPP7.3 |
10 - 14mm Glass |
