Orbis Integra Doorsets - Step-By-Step Installation Guide


Slide the hinge jamb onto the wall, plumb level and tighten the clamps to hold it firmly in place.	Locate the head section into the jamb and whilst holding it in place.	Locate the second jamb into the head section, then slide this jamb onto the wall.


Pull the head section down so that it 'clicks' firmly in place, locked onto each jamb.	Slide the second jamb up/down to level the head section and plumb the second jamb.	Check the width of the opening and all joints are fully closed prior to tightening the clamps


Making sure the frame remains plumb, tighten all the clamps on both jambs using the 5mm hexagon socket wrench (supplied as standard).	Install the hinges onto the door leaf and lift the door into place. Fit remaining furniture and cover clamp holes with plugs supplied.

Step-By-Step Installation Guide